ASM-2

Advantages and features of the Sensor Aspirator Unit

• Reduces installation and maintenance costs

• Reduces engineering time required on site minimising disruption

and downtime under target areas

• Improved safety

• Low cost, low maintenance, long life

• No specialist safety equipment required for servicing

• Internal or remote gas sensor / transmitter

• Full fault monitoring

Specifications

Input - 24v DC ±20% 200mA
Flow Rate - 5 litres/min
Continuous Running - Pump Motor – 6 years expected / Diaphragm – 3 years in air
Flow Fail Monitor
Green LED – normal operation
Red LED – pipe blockage (FF)
Orange LED – pump fail (PF)
Sounder – not less than 85dB @ 30cm
Outputs - Relay S.P.C.O 1Amp @ 230vAC – PF/FF/PF+FF / Selectable 5/12vDC NE or DE
Factory set – open drain
Sample Line -  6mm OD 4mm ID
Max Length – 50m
Material – nylon, polypropylene, PTFE
Couplings - In/Out - push fit - barbed
Mounting: 4 – 3.5 Ø
Dimensions - 123L 54W 80H
Weight - 320 gms
Mounting/Position - The unit should be mounted at chest height with the sample line travelling to the target area at either high or low level. A filter (Part no. 008-212) should be attached to the pipe end where high levels of particulates may be present.

 

Brochure Downloads

Click to View PDF Document

GET IN TOUCH

Google Plus RSS Twitter

WANT TO BECOME A DISTRIBUTOR?