This website uses cookies. For more information on our cookie policy click the link below.

  • FIRE SERVICES

XDI-F1 Win PID

All Gas types Available
• Explosion proof
• Flexible output options
• Non intrusive adjustment using magnets
• Addressable or stand alone
• Hyper terminal communications / RS232 -
live data and set up with 232 adapter
• Back lit alpha numeric full status display
• 3 alarm points
• 2 alarm relays plus fault relay or 3 alarm relays
• data logging

The XDIwin-PID (photoionization detector) is used to measure volatile organic compounds in the low ranges of 0 to 50ppm and 0 to 1000ppm. The unit is fully certified as a flameproof fixed monitor for use in hazardous areas. 4~20mA signaling with CANbus address enables the sensors to be
networked via the GDS Combi control system or customer preferred monitoring systems.

Specifications


Certification
Explosion proof ATEX-IECEx
II 2G Exd IIC T6-T3 Gb
II 2D Extb IIIC T85˚C Db
Power Supply - 15 to 30vDC 24v Nominal
Outputs - 3 wire analog 4~20mA / 4 wire CANbus
Relays Low alarm S.P.C.O
High alarm S.P.C.O
Fault alarm S.P.C.O / overrange
Rating -  0.5A @30vDC
Inhibit option during servicing
Logging - Intervals - One minute to one hour / Storage - 2,880 readings
Display - 2 line alpha numeric back lit status display: gas type, concentration, units, alarm levels, alarm status (low/high/over range), sensor ID, Inhibit
Indicators
Alarm - Red LED / Fault - Amber LED - (Flashing when in inhibit)
Housing Material 0 Copper free aluminium alloy, optional stainless steel
Finish - Chemical resistant epoxy paint - RAL 9003 Signal White / Optional - Marine grade finish
Ingress Protection - IP64 + water shield IP65
Cable Entry - 2 x M20 - 1.5 pitch - alternatives 25mm - 3/4 NPT
Weight - 1.6kg
Temperature -15˚C to +55˚C
Humidity - 0 to 99% RH non-condensing

GET IN TOUCH

Google Plus RSS Twitter

WANT TO BECOME A DISTRIBUTOR?